Paneloc Spring Latches

Versatile Spring Latch Provides Secure
Closure and Easy Access

The Spring Latch is reliable, low cost, used primarily on hinged doors and panels. The simple barrelbolt fastener has many practical applications throughout the electronic cabinet and industrial equipment industries. Smooth, trouble free action combined with easy access and secure closure make the Spring Latch ideal for inspection doors and access panels.

Spring Latch Features
Paneloc Spring Latches are fabricated from quality materials including stainless steel, cold rolled steel, and aluminum in a variety of finishes. They are available with optional widths, hole patterns, forms and pin styles. Easy and inexpensive installation can be accomplished using screws, rivets, or by welding.

The Spring Latch Difference
A unique design feature of the Paneloc Spring Latch is a special C-Ring that acts as a positive-stop retainer, preventing spring over-travel or snagging. The C-Ring also provides secure pin retention and eliminates jamming. The tempered spring is properly tensioned to provide smooth positive pin release and return.

 
   
* Designated dimensions that can be altered to meet your specifications SPRING LATCH PART NUMBERS
  711 712 713 714 715 716 717 718 723
PIN (01)
    P Pin Diameter .125 .156 .187 .250 .187 SQ .250 .187 .375 .250
  * E Extension .187 .250 .375 .500 .250 1.250 .375 1.00 .625
  * R1 Handle Length .437 .625 .687 .812 .610 .720 .72 1.50 .812
  * R2 Handle Extension .187 .250 .312 .375 .312 .375 .38 1.50 .430
BODY (02)
    L Length .875 1.375 2.000 2.75 .875 3.50 2.500 4.00 2.75
  * W Width A .375 .500 .625 .75 .50 .720 .625 1.50 .955
      Width B .500 .750 .875 1.000 - - - - -
  * T Thickness .040 .040 .050 .060 .050 .060 .060 .080 .090
  * H1 Hole Location .156 .187 .187 .250 .181 .281 .300 .620 .400
  * H2 Hole Location .156 .187 .250 .250 .156 .750 .375 .750 .375
  * D Hole Diameter (2) .128 (2) .128 (3) .128 (3) .128 (2) .161 (2) .203 (2) .189 (2) .344 (3) .191
MATERIALS
Designation
Pin Type
Body
Spring
C-Ring
Steel Stainless Steel Aluminum
S C A
12L14 303 SS
1010 304 5052
302 302 302
1060 AISI 632 AISI 632
#715
Square Knuckle
& Square Pin
#716 - 90°
with 90° Form
MODELS
R =
Right Hand
L =
Left Hand
U = Unassembled
POINT STYLES Other styles available including long extensions
1 90° Cone 2 Ball 3 Bullet 4 Flat 5 60° Cone
FINISH Most commercial finishes are available, including zinc and cadmium on steel,passivate and electropolishing on stainless steel, and anodize on aluminum.
ORDERING INFORMATION

*Special forms, offsets, swaging, hole sizes and positioning, or welding projections are available to your specifications.

For more product information, or to request a quote, contact us today!

 
 

©2008 Paneloc Corporation. All Rights Reserved. Site design by Vision Marketing.